VersaLogic VL-EBX-18, Hardware Reference Manual, Page: 29 / 63

EBX-18 Hardware Reference Manual
22
Interfaces and Connectors
Utility I/O Connectors
Several of the interfaces on the EBX-18 are grouped together and made accessible through utility
I/O connectors J4, J5, and J10. Cables and boards are available from VersaLogic that provide
discrete connectors for each of the interfaces; however, you may wish to create custom cables
that enable access to only the interfaces required by your application.

Figure 11 shows the location of the J4, J5, and J10 connectors.

Table 9 on page 23 provides the pinout and pin orientation for connector J4.

Table 10 on page 24 provides the pinout and pin orientation for connector J5.

Table 11 on page 25 provides the pinout and pin orientation for connector J10.
Figure 11. Location of Utility I/O Connectors J4/J5/J10
5