Introduction
EBX-38 Hardware Reference Manual
6
H
ARDWARE
A
SSEMBLY
The EBX-38 mounts on four hardware standoffs using the corner mounting holes, and four more
surrounding the PC/104-
Plus
area. These standoffs are secured to the underside of the circuit
board using pan head screws for the corner mounts, and four more standoffs for the topside in
PC/104-
Plus
area.
The entire assembly can sit on a table top or be secured to a base plate. When bolting the unit
down, make sure to secure all standoffs to the mounting surface to prevent circuit board flexing.
An extractor tool is available (part number VL-HDW-203) to separate the PC/104 modules from
the stack.
Related Documents
The following documents available are on the
EBX-38 Product Support Web Page
EBX-38 Programmer’s Reference Manual
– provides information on the board’s resources
(memory, I/O, and IRQs), a description of the FPGA’s registers, and programming
information for the board’s hardware interfaces.
VersaAPI Installation and Reference Guide
– describes the shared library of API calls for
reading and controlling on-board devices on certain VersaLogic products.
Additional documents:
Processor
Intel Atom E38xx (formerly
“Bay Trail”) System-on-Chip
(SoC) Processor
Intel Atom Processor E3800 Product Family Datasheet
Ethernet Controller
Intel I210-IT Gigabit Ethernet
Controller
PC/104 Specification
http://www.versalogic.com/products/PC104/index.asp
PC/104-
Plus
Specification
http://www.versalogic.com/products/PC104/index.asp
