EPM-PS1 Reference Manual
7
Physical Description
Dimensions and Mounting
The EPM-PS1 complies with all PC/104-
Plus
standards, which provide for specific mounting
hole and stack locations as shown in the diagram below.
Figure 3. EPM-PS1 Dimensions and Mounting Holes
(Not to scale. All dimensions in inches.)
Caution
The board must be supported at all four mounting points to prevent excessive
flexing when expansion modules are mated and detached. Flex damage caused by
excessive force on an improperly mounted circuit board is not covered under the
product warranty.
2
–0.200
0.000
3.150
3.350
0.150
0.000
-0.200
3.575
3.375
3.050
0.125 DIA x4
Use 3mm or #4
standoffs
+
+
+
+