EPM-14 Reference Manual
12
Physical Details
Dimensions and Mounting
The EPM-14 complies with all EBX standards which provide for specific mounting hole and
PC/104-
Plus
stack locations as shown in the diagram below.
Figure 5. EPM-14 Dimensions and Mounting Holes
(Not to scale. All dimensions in inches.)
Caution
The single board computer must be supported at all four mounting points to
prevent excessive flexing when expansion modules are mated and detached. Flex
damage caused by excessive force on an improperly mounted circuit board is not
covered under the product warranty.
3
0.200
0.100
-0.550
–0.200
0.000
3.150
3.350
3.700
0.150
0.000
-0.200
3.575
3.375
3.050
3.175
3.275
0.125 DIA x4
Use 3mm or #4
standoffs
+
+
+
+