verotti ET.200S, User Manual

Page: 15 / 22

The test method as follow:
/n
1S
II�
ppm(gpg) ( Please refer to the actual color card)
0(0) 50(3) 120(7) 250(15) 425(25)
soft-------hard------Very hard
Measure the water quality at the installation site, immerse the reaction area
in the test solution for 1 second, and remove excess water drops;
After 15 seconds, compare the color of the test paper with the standard card
(please refer to the actual color card). The test paper color is close to which
standard, and that is your water concentration value.
Set the descaling reminder conditions on the back of the remote control
according to the concentration value.
If the reading is between two grades, select the higher grade.
Setting method (example: when the concentration value is 120ppm, descaling
reminder once):
MENU 2/4
1. M ANUA L
CLEANING
AUTO
FUNCTION 3/3
2. NIGHT LIGHT
3.DESCALING
REMINDER
WATER
HARDNESS
120PPM
When it's time for descaling, the descaling reminder light flashes , please add
descaling liquid to descale the product
(see page 31-32 for details).
Chapter 4 Cleaning and Maintenance.
4.1 Toilet seat unit cleaning
Clean the seat unit regularly, or immediately after being stained with dirt. If not
cleaned regularly, the dirt may become noticeable, and become stubborn.
Be sure to cut off the power supply before cleaning the surface of the product.
Do not put water or detergent into the product or the power plug, which may
cause short circuit, electric shock, or fire.
Attention: discoloration, yellowing or peeling of paint due to improper cleaning.
-Do not use corrosive cleaners or cleaners containing chlorine or acids.
-Use only cleaning agents and equipment specific to this application.
-Follow the detergent instructions.
-Never mix detergents.
Wipe with a soft damp cloth. A neutral soap solution is an ideal daily cleaner.
4.2 Nozzle cleaning
The nozzle will retract automatically for self-cleaning before and after cleaning
function.
• Manually clean the nozzle.
Clean the nozzles regularly or immediately after dirt is found.
�
•• ,
1.Press and hold the "Stop" button to ensure the
toilet is not working.
24 25