ENGLISH
Use & Care Manual
12
Cleaning the Cooktop
The entire Cooktop can be safe�y cleaned by
wiping with a soapy sponge, then rinsing and
drying. If stubborn soil remains, follow the
recommended cleaning methods below.
CAUTION:
Before cleaning, be certain the burners are turned
off and the grates are cool.
Always use the mildest cleaner that will do the job.
Use clean, soft cloths, sponges or paper towels.
Rub stainless steel finishes in the direction of the
grain. Wipe area dry to avoid water marks.
Do not clean removable cooktop parts in any self-
cleaning oven.
After cleaning, place all parts in their proper
positions before using cooktop.
The cleaners recommended below and on the
following page indicate cleaner types and do not
constitute an endorsement of a particular brand.
Use all products according to package directions.
Cooktop Part / Material Suggested Cleaners
Parts and materials
Suggested cleaners
Suggestions/Reminders
Burner base
(Cast aluminium)
Damp cloth.
Keep the gas injector area free of
cleaning agents and any other material
from entering the injector orifice.
• Detergent and hot water; rinse and
dry.
• Stiff nylon bristle-toothbrush to clean
port openings.
Rub lightly, in a circular motion.
Aluminium cleaners may dull the surface.
Gas spreader
(Cast aluminium)
Abrasive cleansers: Revere ware®
metal polish. Following package
direction Use Brillo® or S.O.S.® pads.
Rinse and dry.
To clean port opening, use a tooth brush
or straightened paper clip.
Burner cap and grate
(Porcelain enamel on cast iron)
• Non abrasive cleaners: Hot water
and detergent, Fantastic, Formula
409. Rinse and dry immediately.
• Mild abrasive cleaners: Bon Ami®
and Soft Scrub®.
• Abrasive cleaners for stubborn
stains: soap-filled steel wool pad.
• The grates are heavy; use care when
lifting. Place on a protected surface.
• Blisters/crazing/chips are common due
to the extreme temperatures on grate
fingers and rapid temperature changes.
• Acidic and sugar-laden spills deteriorate
the enamel. Remove soil immediately.
• Abrasive cleaners, used too vigorously
or too often, can eventually mar the
enamel.
Igniter
Burner grate
Burner
cap
Burner
head
Burner
base*
