Seite 12
User Manual BARISSIMA, V 1.00, 02.2015, English
2.1.2
Intended use
•
This milk foamer is manufactured for commercial use.
•
This milk foamer is not suitable for home use.
•
This milk foamer is not intended for use by persons (including Children) with reduced
intellectual, sensory and physical abilities or lack of experience and knowledge,
unless they are supervised by a person responsible for their safety
2.1.3
Precautions
Installation note
•
For trouble-free operation of the machine a room temperature of +10°C to +40°C and
a maximum relative humidity of 80% is required.
•
The installation and initial operation of the machine must be performed by
an authorized service technician.
•
The installation surface must be level and able to bear the weight of the milk foamer.
•
The milk foamer must be placed outside the direct movement of persons and
overseen by trained personnel.
•
The milk foamer must not be exposed to direct sunlight.
•
The milk foamer must not stand in the open.
•
When replacing the milk foamer the old hose sets may no longer be used.
•
The manufacturer is not liable for damages caused by improper installation.
Note!
Please refer to the detailed description in chapter "3 Initial operation".
Protection of the electronics
•
For maintenance or repair work a control plug under voltage must never be plugged
in or out.
•
The manufacturer is not liable for damages caused by improper reparation.
•
All parts in the milk foamer are calibrated and may only be changed by an authorized
service technician.
•
The milk foamer must be volt-free before it is opened.
•
The power supply and plug must be replaced by an authorized service technician
only.
Warning!
Risk of death by defects in the power cord!
Defects in the power cord can lead to life-threatening electrical shocks.
•
Protect the power cord from damage.
•
Do not rip, bend, clamp or squeeze the power cord.
•
Protect the power cord from sharp edges, moisture, heat or oil.
•
Do not connect the machine if the power cord is damaged.
•
Do not attempt to repair a damaged power cable by yourself.
•
A damaged power cord must only be replaced by an authorized service technician.