6
50004428
VM508 / VM658 Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
����
������������
�����
Skirt Left
Assembly
Skirt Corner Assembly
Skirt Front
Assembly
B158
#10-24 x 3/8”
Screws
Figure 3
Corner Post/Skirt Detail
Loosen Outer
Bolt at Back
Side
Step 3: Attach Skirt
Parts Required:
(1) Skirt Left Assembly
(1) Skirt Right Assembly
(1) Skirt Front Assembly
(2) Skirt Corner Assemblies
(7) #10-24 x 3/8” Screws (50004268)
(4) Adjustable Leveling Glide
Figures 2 & 3
Screw-in two (2) adjustable leveling glides into hex
threaded insert provided in front skirt assembly.
Screw-in one (1) adjustable leveling glide into hex
threaded insert provided in left and right skirt as-
semblies.
Attach left skirt assembly to the unit:
– Loosen one hex bolt from corner post. (Refer to Corner Post Detail)
– Slide left skirt assembly between bottom panel and side panel.
– Secure left skirt assembly with two (2) #10-24 x 3/8”
screws.
– Tighten hex bolt at the back of the unit.
Repeat these steps for right side.
NOTE:
If you have any problems sliding the
skirt assembly (left or right), loosen four
(4) screws on side panel and lift the side
panel to allow more space.
Slide two (2) skirt corner assemblies into
the front skirt assembly. Slide above
assembly into attached left and right
skirt assemblies. Secure all skirt assem-
bly parts with three (3) #10-24 x 3/8”
screws.
����
���������������������
����
Leveling
Glide
Skirt Right Assembly
Skirt Front Assembly
Skirt Left Assembly
B157
Figure 2
Leveling
Glide
Inverted View
