Page 6
VC3505 ASSEMBLY
Step 10: Install Internal Components.
Required:
(3) sear plates, (2) cooking grates,
warming rack
Refer to Fig. 9.
Place the sear plates into the base unit ensuring that edges
with the finger holes face the grill front, and the side
edges face down.
Position the cooking grates into the base similarly; these may
be turned over to provide a flat surface for delicate foods.
Set the warming rack into the two supports in the ends of
the rear lid. Place the bent lip at the back of the unit.
fig10_iternalVM.eps
Step 10: Install the LP cylinder (LP models only).
Required:
LP gas cylinder (not supplied)
NOTE: Before lighting the grill, refer to the Owner’s man-
ual for proper cylinder specifications, filling requirements,
regulator attachment, and leak testing procedures.
Sear Plates
Cooking
Grates
Warming
Rack
Finger
Hole
Fig. 9
Fig. 10
Fig. 11
Step 11: Install the cylinder retainer
(LP models only).
In order:
1
2
3
