Vermont Castings TrimWorks 36DVBGTKCB Installation Instructions Download Page 1

Georgian Bay 36/41”

Installation Instructions

Models: 
36DVBGTKCB, 36DVBGTKB
41DVBGTKCB, 41DVBGTKB

DVBGTKCB – Classic Black Cast Iron
DVBGTKB – Ebony Black Enameled Cast Iron
The Georgian Bay is designed for use on fireplace mod-
els 36XDV (36”), DV360 (41”) and DVRT41 (41”). 

NOTE:

 Cast iron parts can be heavy, an assistant 

would be advisable for this installation.

CAUTION:

 Porcelain enamel is fragile. The finish can 

be easily damaged if castings are not handled carefully. 
Always place castings on a protective surface, such as 
a towel, blanket or carpet.

Check Contents of Shipping Carton

Compare contents of carton in Figure 1 with actual 
parts received. If any parts are missing, or damaged, 
contact your local dealer before starting installation.

Contents:

 (Fig. 1) Top Dome Section, Main Body Sec-

tion, knob extensions (2), Top Heat Deflector, Screws (4)

Tools required:

 Phillips screwdriver, measuring tape

NOTE: It is our recommendation that you 
install the Georgian Trim, if purchased, be-
fore you install the Georgian Bay. This will 
help reduce damage to both cast units.
Fireplace Unit Preparation

Before you start your bay installation the fireplace unit 
needs to have some items removed. (Fig. 2) 
1.  Remove the top louvre by gently sliding the louvre 

upward and away from the unit. 

2.  Remove the sheet metal top flange located on the 

bottom side of the top louvre opening. You will need 
to remove between 2-5 Phillips screws that are hold-
ing the flange in place. 

3.  Remove the bottom louvre by removing 4 Phillips 

screws or by pulling the hair pins that are holding the 
hinge pins in place on the unit.

�����
�������������
�����

Top Flange

Top 

Louvre

Bottom 

Louvre

KT696

Fig. 2

  Remove the fireplace top and bottom louvre and top 

flange.

4.  Install the top heat deflector shield by aligning the 

holes of the shield with the four (4) inside holes on 
the fireplace top flange. Use the four (4) screws sup-
plied to attach the shield to the unit. (Fig. 3) 

This completes the fireplace unit preparation.

30003743  5/08  Rev. 1

������
���������������������
�����

Top Dome 

Section

Main Body 

Section

CAR191

Fig. 1

  Carton contents.

Knob Extensions

Screws

Top Heat 

Deflector

Reviews: