30
Vermont Castings Stratton
30004508
optional accessories
Fan kit
Fk26STRaT Fan
The FK6STRAT fan helps distribute heated air from
within the firebox out into the room. The fan is con-
trolled by a remote switch (installed in a junction box
during fireplace installation) that turns power on and
off. An optional rheostat may be used for variable fan
speeds.
Specifications
115 Volt / 60Hz / .75 Amps
Maintenance
The fan itself does not require regular maintenance,
however, periodic cleaning of the fan and the surround-
ing area is required.
installation
1. With the decorative face and iron ash lip removed
place fan assembly at the front of the unit below the
door, Attach using two () Philips screws provided.
(Fig. 40)
. If the receptacle box was connected when the unit
was installed, the fan lead can be directly plugged
into the outlet. Refer to Page 9, “Installing the
Electrical Wire”. Run the power cord to the right and
press the rubber grommet into the slot as indicated
in Figure 40.
The fireplace, when installed must be
electrically connected and grounded in ac-
cordance with local codes, with the current
cSa c22.1 canadian electrical code or for
US installations, follow local codes and the
National electrical code, aNSi/NFpa No.
70.
any electrical rewiring of this fan must be
completed by a qualified electrician.
Turn off all power before hook up.
FP2386
fk26 location
Fan
FP386
Fig. 40
FK6STRAT fan placement.
Outlet
Trim kits
A decorative steel face plate with brick ledge for masonry
applications (if needed) is available to enhance the look
of your Stratton fireplace. Installation instructions are
included with the kit.
NOTE: The following trim kit MUST BE used to complete
your installation.
Model
Description
STRaTciRcb
Façade Stratton circa
FP1870
face plate
6/08
FP1870
Fig. 41
Front face.
adapter collar
Model TwabR
When using the Model S (triple wall) chimney system,
the adapter collar is required. The TWABR converts the
fireplace to a 3-wall system.
Grommet
Mounting
Screws ()
variable Speed control
Model ScvS
The variable speed control provides for speed adjust-
ment of fan air flow.
outside air Termination kit
Model ak-MST
the outside air termination kit provides an access point
for outside air to enter the home or chase.
hearth extension kit
Model eh2416
The hearth extension kit provides for hearth extension
floor protection.
