VCS4005, VCS5005/5010 Assembly
Page 6
Step 10: Install Internal Components
Materials Required:
VCS4005 - (4) Sear Plates, (3) Cooking
Grates, Warming Rack
VCS5005/5010 - (5) Sear Plates, (4) Cooking
Grates, Warming Rack
Place the Sear Plates into the base unit ensuring
the edges with the “finger holes” face the grill
front. Position the Cooking Grates into the base
with the finger holes facing the front. These may
be turned over to provide a flat surface for deli
-
cate foods. Set the warming rack into the two
supports in the ends of the rear lid.
Sear Plates (4/5)
Cooking
Grates (3/4)
Warming Rack (1)
Finger Hole
Step 11: Attach Stabilizer Bracket
Materials Required:
(2) 10-24 x 1/2” Bolt (black)
(1) Stabilizer Bracket
Attach the Stabilizer Bracket to a bottom
panel as shown. Use two (2) 10-24 x 1/2” long
(black) bolts through two holes in the bottom
panel to the stabilizer bracket.
Stabilizer Bracket
