20306749
33
LX Series Direct Vent Gas Fireplace
INSTALL FACING
Figure 49
1. Align the four (4) holes on the facing with the four (4)
holes on the fireplace.
2. Attach facing with four (4) fasteners provided.
NOTICE
Your firescreen’s finish has been covered at the factory with a high
temperature powder coating and should never be polished, nor should
it ever need to be polished. Instead of polishing, clean with a mild soap
solution using a clean cotton terry cloth, then dry. To remove any stubborn
stains from the glass, use a mild soap solution, followed by a dampened
towel (dampened with clean water only), followed by a dry towel without
using soap. Do not use ammonia or ammonia-based glass cleaner on
the firescreen, as these types of cleaners may damage the finish of your
firescreen. Minor finish scratches and fingerprints can be removed by
applying 50/50 vinegar and water solution before lighting the heater. Any
fingerprints left on the facing will be permanent when heater is lit.
FP2720
LX facing
Decorative Finish
Facings use Finale
Nuts and Studs
Standard Black
Facings use Bolts
Bolts
Facing
FP2720
Figure 48 -
Install Filigree Facing
IMPORTANT: To open door with decorative
finish facing, lift door up then rotate door
down.
FINAL INSTALLATION
Figure 49
Barrier
Screen