The filter section o
ff
ers the following control elements:
Picture 3: Filter (VCF)
MODE
MODE selects the filter type.
LP = Low pass
Low pass filter with a slope of 24dB per octave
BP = Band pass
Band pass filter with a slope of 12dB per octave
HP = High pass
High pass filter with a slope of 24dB per octave
BALLS
BALLS will emphasize low and higher frequencies in a predefined ratio.
The resulting signal will cut through the mix better with increased
punch and bass amount. The high frequency enhancement will be best
accentuated with higher RESONANCE settings.
ATTENTION:
The amplification using BALLS will not necessarily be per-
ceived as increased level. However, the lower frequencies
are emphasized. This can lead to clipping of sensitive
inputs in audio-interfaces. Make sure, you match FILTER
Lancet's output level or the input sensitivity (Gain) or your
audio-interface to avoid distortion.
Owner's Manual VERMONA Filter Lancet
- 9 -
Summary of Contents for Filter lancet
Page 1: ...2ZQHU V 0DQXDO ...
