Vermeiren Navix SU, Installation Manual

Page: 8 / 16

Navix SU
2020-08
Assembly and adjustments
Installation manual
- 6 -
EN
NL
3.2.2 Adjusting the armrests
Adjusting armrest length
Adjust the length of the armrests as follow (range 90
mm: stepless):
1. Loosen the screw  just below the armrest.
2. Adjust the armrest to a comfortable length.
3. Tighten the screw
 properly.
Check that the armrests are positioned identically
on both sides.
Adjusting armrest width
Adjust the width of the armrests as follow (range 25
mm: stepless / on each side):
1. Loosen the screw  on the back of the
wheelchair just below the seat frame.
2. Adjust the armrest to a comfortable width.
3. Tighten the screw
 properly.
Check that the armrests are positioned identically
on both sides.
3.2.3 Adjusting the footplate
Risk of injury and/or damage

Make sure that the footplate is properly tightened before using the wheelchair.

Avoid that the footrest make any contact with the ground. Keep a minimum distance from 60
mm above the ground.

Never grasp the wheelchair by the footplate in order to move the wheelchair. Only grasp fixed
parts of the frame.
Adjust the height of the footplate as follow (6 different
positions: range 100 mm: steps 20 mm):
1. Loosen and remove the screws  .
2. Move the footplate to the desired height.
3. Retighten the screws
 .
3.2.4 Adjusting the calf rests
Adjusting calf rest height
Adjust the height of the calf rests as follow (range 55
mm: stepless):
1. Incline the footplate with the operator control.
2. Loosen the two screws
 a little bit.
3. Adjust the calf rests to a comfortable height.
4. Retighten the two screws
 properly.
WARNING