Vermeiren Goliat, User Manual

Page: 8 / 84

Goliat
2019-03
Assembly/disassembly and adjustments
4
EN
NL
4 Assembly/disassembly and
adjustments
Risk of injuries
Assemble the rollator completely, before
adjusting its height.
4.1 Assembly
4.1.1 Mounting the front and rear wheels
Risk of falling or
tipping over
Always set the four wheels to the same
height.
When mounting the rear wheels,
check that the brake cable
connection (4) is positioned to the
inside of the rollator.
1. Put the rollator on the front/back.
2. Press and hold the spring button (1) on
the wheel support.
3. Slide the wheel support (2) into the
frame tube (3) until the spring button
pops out of the desired adjustment
hole.
4. Repeat for the other wheels. Make
sure that all four wheels are well
secured.
4.1.2 Mounting the handgrips
1. Place the rollator on four wheels. Make
sure that it is standing stable.
2. Push and hold the spring button (5) on
the handgrip.
3. Slide the handgrip into the frame tube
(6) until the spring button pops out of
the desired adjustment hole.
4. Repeat for the second handgrip. Make
sure that both handgrips are well
secured, and that they are set to the
same height.
Cable clamps
To prevent the cable from being trapped
between moving parts of the rollator,
secure the brake cable to the frame using
the cable clamp (7).
CAUTION
CAUTION
1
1
3
2
3
2
4
5
6
7