Forest 3
2020-03
Assembly and adjustments
Installation manual
- 7 -
EN
NL
PL
CS
3.2.3 Armrest length
Adjust the length of the armrests as follows (stepless,
90 mm):
1.
Loosen the screw (1).
2.
Adjust the armrest to a comfortable length.
3.
Tighten the screw (1) properly.
Check that the armrests are positioned identically on
both sides.
3.2.4 Armrest width
Adjust the width of the armrests as follow (range 25
mm: stepless / on each side):
1.
Loosen the screws (1) on the back of the
wheelchair just below the seat frame.
2.
Adjust the armrest to a comfortable width.
3.
Tighten the screws (1) properly.
Check that the armrests are positioned
identically on both sides.
The minimum and maximum adjustment will be
indicated by the triangle. The triangle must be
completely visible.
3.2.5 Footrest B06
Footrest length
Risk of damage
Avoid that the footrests make any contact with the ground.
Keep a minimum distance of 50 mm above the ground.
1.
Remove the screw (A).
2.
Adjust the length of the footrest to a comfortable length
(range: 120 mm, steps 20 mm).
3.
Tighten the screw (A) properly.
Check that the footrests are positioned identically on both
sides.
CAUTION
MINIMUM
MAXIMUM
