Express
2012-03
Page 11
2.5 Mounting or removing backrest
L
L
L
L
WARNING:
Risk of injury – Make sure that both securing levers are engaged.
L
L
L
L
CAUTION:
Chance of pinching – Do not place fingers between the backrest tubes
of the wheelchair.
For transport the backrest of the wheelchair can be completely removed and put on the seat.
To mount the backrest on the electric wheelchair:
1. Check that the levers are not fixated otherwise
loosen the levers .
2. Mount the backrest tubes
Ⓐ
in the hexagonal
tubes of the frame
Ⓑ
.
3. Retighten the levers properly.
To remove the backrest from the electric
wheelchair:
1. Turn on the levers until they come loose.
2. Remove the backrest tubes
Ⓐ
out the hexagonal
tubes of the frame
Ⓑ
.
3. Put the backrest on the seat for transportation.
2.6 Mounting or removing battery housing
L
L
L
L
CAUTION:
Chance of pinching – Do not place fingers between the battery
housing and guide rails of the wheelchair.
To mount the battery housing on the electric wheelchair:
1. Grasp the handles to lift the battery housing.
2. Lift the battery housing with the plastic bushings on the rails .
3. Slide the battery housing backwards in the correct position.
4. Turn the locking hook clockwise to secure the battery housing.
5. Check that the battery housing is firmly fixated to avoid damage to the battery housing.
6. Connect the cables from the electronic.
To remove the battery housing of the electric wheelchair:
1. Disconnect the cables from the electronic.
2. Turn the locking hook anti-clockwise to loosen the battery housing.
3. Slide the battery housing to the front.
4. Grasp the handles to lift the battery housing.
5. Lift the battery housing out the rails .
