Vermeiren Bayo, Instruction Manual

Page: 17 / 36

Bayo
2014-04
Page 15
The angle of the foot supports

can be
adjusted in 4 different positions (steps: 8,5°)
1. Loosen the wing nuts

.
2. Turn the foot supports

in the desired
position.
3. Retighten the wing nuts

.
4. Check the foot supports are firmly
fixated.
3.6.2 Adjusting the length of the footrest
The design of Bayo 40 provides a gradual
change in the length of the footrest.
The footrest of the Bayo 40 can be changed
in 2 different lengths (steps 35 mm: outer
tube) and 4 different lengths (steps of 25
mm: inner tube).
Adjustments are made as follows:
1. Loosen the screws

on both sides.
2. Move the footplate

up- or downwards
until the desired length.
3. Retighten the two screws

again.
4. Check the footplate is firmly fixated.
3.6.3 Adjusting the inclination of the footrest
Changing the angle of the footrest can be in
the range of 85°.
Adjust them as follows:
1. Turn both levers

from the regulator
strips loose.
2. Adjust to optimal inclination for the
footrest.
3. Retighten both levers

again.
4. Check the footrest is firmly fixated.