S725TX Mini Skid Steer
Preparation 40-9
Install/Remove
NOTICE:
Before connecting any attachment to the machine, ensure all machine and attachment mounting
plates are free of dirt and debris in order to ensure the attachment can be properly connected.
Attachment - Install
Step 1:
Position attachment on a level surface with sufficient area behind it to
accommodate the machine.
Step 2:
Ensure pins are rotated so that tops of pins face outward as shown
(1)
.
Step 3:
Start machine, and lower lift arm. Tilt loader mounting plate forward
slightly.
Step 4:
Drive machine FORWARD, aligning loader mounting plate
with
attachment.
WARNING:
Attachment can fall off loader attachment mounting plate if
incorrectly attached. Death or serious injury could result.
When installing attachment, be certain that pins snap into place, pin tops are
rotated inward, and pin ends are visible beneath attachment mount.
1
Summary of Contents for S725TX
