21-8 Electronic Controller
D20x22 Series II Navigator HDD
S
TARTUP
S
CREEN
Model Selection:
One of three screens will be displayed at startup. If your
machine model is not displayed
(1)
at the bottom, use the
Increase
or
Decrease
Key
to choose another model. Then press
Enter Key
.
Other messages
that are displayed at bottom of screen:
Waiting for Key . . . . . . . . . . . . controller waiting for keyswitch to be turned ON
Waiting for Seat. . . . . . . . . . . . . . . . controller waiting for operator to sit in seat
Engine Shutdown . . . . . . . . . . . Lockout system has initiated engine shutdown
Hydrlc Shutdown. . . . . . . . . . Lockout system has initiated hydraulic shutdown
Stopped . . . . . . . . . . . . . . . . . . . . . . . . . . . . controller has shut down the engine
-- Vise -- . . . . . . . . . . . . . . . . . . . . . . . . . . . .Trying to start RATT Oscillate mode
. . . . . . . . . . . . . . . . . . . . . . . . .or restart AutoDrill while the front vise is closed
Parked Shutdown (Tier 4 Interim/Stage IIIB). . . tracking and drilling disabled
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .to allow forced DPF regeneration
A
CTIVE
F
AULT
D
ISPLAY
When this screen appears a fault is present. Use the Fault Codes chart and
determine next action. Refer to
Press
Service Screen Key
to cycle
through the next four screens.
1
