504PRO_604PRO_o-m2_00
-
11-4 Maintenance/Setting
504/604 PRO Baler
11.3
Safety Signs and Labels
NOTICE
Safety signs located on your machine contain important and useful information that will help you operate your
equipment safely. Refer to the Parts Manual for safety sign location. To assure that all signs remain in place and in good
condition, follow instructions given below.
•
Keep signs clean. Use soap and water - not mineral spirits, abrasive cleaners, or other similar cleaners that will damage the safety sign.
•
Replace any damaged or missing signs. When attaching signs, the temperature of the mounting surface must be at least 40°F (5°C). The
mounting surface must also be clean and dry.
•
When replacing a machine component with a sign attached, replace sign also.
•
Replacement signs can be purchased from your Vermeer equipment dealer.
11.4
Environment/Disposal
11.4.1
Lubricants
•
Dispose of lubricants properly and do not pollute the environment.
•
Observe the safety data sheets of the lubricants used. Biologically degradable lubricants must be disposed of separately.
1 quart of oil pollutes 250,000 gallons of water.
1 litre of oil pollutes 1 million litres of water.
1 quart of oil pollutes 13,000,000 cubic yards of soil.
1 litre of oil pollutes 10 million cubic metres of soil.
11.4.2
Consumables
Nets and machine parts thrown away pollute the environment. They endanger in particular the animal world.
•
Therefore: Dispose of nets and machine parts in a responsible manner.
https://tractormanualz.com
Summary of Contents for 504 PRO
Page 153: ...https tractormanualz com ...
