Installation
Secure 3/3
Install the IR cover by aligning the
Verkada logo with the status LED,
then press firmly toward the base.
Press on all sides until the cover
snaps into place.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
14
If you need to open the dome cover
,
you need to remove the IR cover first.
●
Use a medium size flat-blade
screwdriver as a lever.
●
Find the small access holes on the
side and the rear of the IR cover.
●
Use the screwdriver to slowly yet
firmly lever down on the edge of
the cover. You need to perform
this action on both access points.
The IR cover can then be
removed.
