Connect the Power adapter.
Proceed as follows:
1
Plug the connector of the electric power adapter into the Hub’s
Power
port.
2
Plug the adapter into a nearby power outlet.
Turn on the Hub
Push the
On/Off
button to turn on the Hub. After some time:
•
The
Power
LED should be solid green.
•
The
Ethernet
LED should be solid/flashing green.
•
The
BroadBand
LED should be solid green.
If this is not the case, check the connections that you made in the previous steps.
Connect the Hub to your Phone
The Hub allows you to connect both DECT phones and fixed phones. To connect:
•
A DECT phone or a fixed phone connected to a D2A device, consult the Setup and User Guide for more
information.
•
A fixed phone, plug the phone cable in the Hub’s
Phone
port.
Read the Safety Instructions and Regulatory Notices
Before you start using your Hub
,
carefully read the Safety Instructions and Regulatory Notices on the
following pages.
Power
Phone
