LV65 Indoor/Outdoor Receiver User Guide
Proprietary & Confidential Statement: This document and the information disclosed within, including the document structure and
contents, are confidential and the proprietary property of Verizon and are protected by patent, copyright and other proprietary
rights. Any disclosure to a third party in whole or in part in any manner is expressly prohibited without the prior written permission
of Verizon.
20
Step 2. Mark the screw locations
Place the indoor bracket on the location on the wall where you want to install the device, then use a
pen to mark the locations where the screws will be drilled into the wall (as indicated in the right
image below).
Note: DO NOT peel off the protective backing when installing the bracket on a wall.
Step 3. Drill installation holes and install the bracket
Use a drill to drill 1/4 inch holes in the marked locations, then take two wall anchors from the indoor
wall screw pack and place them into the holes (make sure the tops of the anchors are flush with the
wall).