35
4-4: To eliminate all air bubbles use both thumbs to press in all areas where the Gecko tape
makes contact with the glass. Spend at least one minute pressing (30 seconds on the upper part
and 30 seconds on the lower part of it).
4-5: Place the bracket onto the Gecko tape plate by aligning with the four pegs and then press
on the bracket downwards until you have the haptic feedback.
Note: When attaching the mounting bracket, make sure it is oriented in the manner shown in the image below
(with the opening of the mounting slot facing up).
Step 5.
Assembling the bracket with the 5G Internet Gateway
5-1: Once the bracket is securely affixed to the window, align the mounting head on the 5G
Internet Gateway
with the installation slot on the bracket, then push down on the device to insert
the mounting head into the slot. Adjust the alignment of the 5G Internet Gateway as required, and
make sure the raised nubs on the mounting head fit into the dimple holes on the inside of the slot.
5-2: Adjust the angle of your 5G Internet Gateway. Once the angle is right, turn the tab on the 5G
Internet Gateway.
4-5
4-4
5-2
5-1
6
Summary of Contents for LV5KIHP
Page 1: ...i 5G Internet Gateway User Guide...
Page 34: ...31...