Before getting started, be aware that there are two Verizon Connect devices that look alike, EAT and
EAT-B. This installation guide deals with the EAT device.
The EAT device is powered by the equipment, that is, the asset, and therefore has a power cable
attached to it. If the device you are installing does not have the cable. then it is the EAT-B device, not the
EAT device. If you are installing the EAT-B device, refer instead to the
Verizon Connect Equipment Asset
Tracker- Battery installation guide
Device label
The label with S/N and IMEI barcodes is found on the side of the device, which allows it to be read even
after mounting. You will scan the label when instructed in the Reveal Hardware Installer app, or if the scan
should fail, enter the IMEI. The text on the device label is small, so if difficult to read, you can refer to the
enlarged label found on the box that came with the device. The box label is also scannable.
