10
First steps
C385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008
Ve
rs
ion 4,
29
.10.
2007
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry
rooms within a temperature range of +41°F to +113°F.
¤
Set up the base station and charging cradles at a central location, on a flat,
nonslip surface in your house or apartment.
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furniture, the
occurrence of marks on the surfaces cannot be completely ruled out.
For instructions on how to mount the base station and charging cradle on a
wall,
Please note:
u
Never expose the telephone to heat sources, direct sunlight, or other elec-
trical devices.
u
Protect your telephone from moisture, dust, and corrosive liquids and
vapors.
Connecting the base station
¤
First
connect the
power adapter
1
.
¤
Then
connect the
telephone jack
2
,
and insert the cables
into the cableducts.
Please note:
u
The power adapter
must
always be con-
nected
, as the phone
will not operate with-
out a power connection.
u
Only use the power adapter and phone cord
. Pin connections on
telephone cables can vary (pin connections
Please note
Keep in mind the range of the base station.
It is up to 984 feet in unobstructed outdoor areas and up to 165 feet inside
buildings. The range is reduced when Eco Mode (
page 38) is activated.
1
1
1
1
1
2
