RIENZI
OWNER’S MANUAL
R.2.0
September 2009
VERITY AUDIO
PAGE 3
Safety Instructions
In these safety instructions the word "product" refers to the
Verity Audio RIENZI and all its accessories.
1.
Read Instructions - All the safety and operating
instructions should be read before the product is operated;
2.
Retain Instructions - The safety and operating
instructions should be retained for future reference;
3.
Head Warnings - All warnings on the product and in the
owner's manual should be followed;
4.
Follow Instructions - All operating and maintenance
instructions should be followed;
5.
Cleaning - Unplug this product from your power
amplifier before cleaning. Do not use liquid or aerosol
cleaners. The product should be cleaned only as
recommended in this manual;
6.
Accessories - Do not use accessories not recommended
in this manual as they may be hazardous;
7.
Water and Moisture -
Hazard of electric shock
- Do not
use this product near water or in rainy / moist situations;
8.
Heat - Avoid placing the speakers near a heat source;
9.
Placing or moving - does not place on an unstable cart,
stand, tripod, bracket, or table. The product may fall causing
serious injuries, and serious damage to the product. A
product with cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the product cart combination to overturn;
10.
Power amplifier -
Hazard of electric shock
- Do not
manipulate, move, clean or disconnect your product while
your power amplifier is turned on;
11.
Moving when Packed - The product comes packed in two
double cardboard boxes. These boxes are heavy and cannot
be carried by a single person. Attempting to move a
transportation box alone could cause serious injuries;
12.
Spikes - The underneath product spikes assure a tight
coupling with the floor. They are razor-sharp and must be
manipulated with extreme care. Do not move the product
while the product spikes are installed. The product spikes
should be removed before moving the product;
13.
Input power - To reduce the risk of fire or electric shock,
do not allow an input power over 150 watts rms (30.0 volts
rms) to the product;
14.
Unpacking and Packing Instructions - The product should
be packed and / or unpacked only as indicated on the
packing/unpacking instruction sheets;
15.
Ancillary equipment - Do not connect or play the product
before making certain that the associated equipments are in
good condition;
16.
Object and Liquid Entry - Never push object of any kind
into this product through openings as they may touch
dangerous voltage points or short out parts that could result
in a fire or electric shock. Do not spill liquid of any kind onto
or into the product;
17.
Servicing - Do not attempt to service the product
yourself. Refer all servicing to qualified service personnel;
18.
Damage Requiring Service - Turn off your power
amplifier(s) and disconnect all cables from the product, and
refer servicing to qualified service personnel under the
following conditions:
a.
When the product exhibits a distinct change in
performance;
b.
If any liquid has been spilled into, or objects have fallen
into, the product;
c.
If the product has been exposed to rain or water;
d.
If the product does not operate normally even if you
follow the operating instructions. Connect only your
product as recommended in your owner's manual.
Improper connections may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation;
e.
If the product has been dropped or the cabinet has
been damaged.
19.
Replacement Parts - When replacement parts are
required, make sure the service technician use only original
parts as specified by Verity Audio. Unauthorized substitution
may result in fire, electric shock or other hazards;
20.
Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in safe operating
order.
Your product is a passive device. Risk of electric
shock is only possible when it is hooked up to a
power amplifier.
To reduce the risk of electric shock, do not expose
this product to rain or moisture.