Table 1-4
NetBackup 5230 rear panel configurations
(continued)
Slot 6
Slot 5
Slot 4
Slot 3
Slot 2
Slot 1
Configuration
Not
populated
Not
populated
Dual 8 Gb
Fibre
Channel
Not
populated
Not
populated
SAS
RAID
controller
B
(with an
external
storage shelf)
Not
populated
Not
populated
Dual 8 Gb
Fibre
Channel
Dual 10
GbE
Ethernet
Not
populated
SAS
RAID
controller
C
(with an
external
storage shelf)
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
Dual 10
GbE
Ethernet
Dual 8 Gb
Fibre
Channel
SAS
RAID
controller
D
(with an
external
storage shelf)
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
Dual 8 Gb
Fibre
Channel
SAS
RAID
controller
E
(with an
external
storage shelf)
Configuration D notes:
■
You can use the FC ports in slots 2 and 4 for VMware, Optimized Deduplication
over FC, or tape library connectivity. Both ports on each card are configured in
Initiator mode.
■
You can use the FC ports in slots 5 and 6 for Fibre Transport media server
(FTMS) support.
■
Understand that port 1 on the FC HBA cards in slots 5 and 6 is configured in
Target mode. The other port on these cards is configured in Initiator mode.
Configuration E notes:
■
You can use the FC ports in slots 2, 3, and 4 for VMware, Optimized
Deduplication over FC, or tape library connectivity. Both ports on each card are
configured in Initiator mode.
■
You can use the FC ports in slots 5 and 6 for Fibre Transport media server
(FTMS) support.
■
Understand that port 1 on the FC HBA cards in slots 5 and 6 is configured in
Target mode. The other port on these cards is configured in Initiator mode.
17
Product overview
About the NetBackup 5230 rear panel configurations
