VERITAS Access 3340 Command Reference Manual Download Page 35

Page: 35 / 110

Network > DNS

Network > DNS

– Configure the DNS information for the appliance.

SYNOPSIS

DNS Add NameServer

IPAddress

DNS Add SearchDomain

DomainName

DNS Delete Domain

DNS Delete NameServer

IPAddress

DNS Delete SearchDomain

DomainName

DNS Domain

Name

DNS Show

DESCRIPTION

You can use this command to perform the following tasks:

■

Add or delete a name server to the DNS configuration.

■

Add or delete a domain name to the DNS search list.

■

Set the appliance DNS domain name.

■

Show the current DNS information.

OPTIONS

DNS Add NameServer

IPAddress

Add a DNS nameserver to the DNS configuration.

Where

IPAddress

is the IP address of the DNS name server.

DNS Add SearchDomain

DomainName

Add a DNS search domain to the configuration.

Where

DomainName

is the target domain to add for searching.

DNS Delete Domain

Delete a DNS domain name.

DNS Delete NameServer

IPAddress

Delete a DNS named server from the configuration.

Where

IPAddress

is the IP address of the DNS name server.

Main > Network

Network > DNS

Summary of Contents for Access 3340















































































































Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands

VERITAS Access 3340, Command Reference Manual

Search results

Summary of Contents for Access 3340

Reviews:

Related manuals for Access 3340

Brands by name

Popular brands