VERITAS 5350 Product Description Manual Download Page 72

Page: 72 / 78

Table A-2

Veritas 5U84 Primary Storage Shelf / 5U84 Expansion Storage
Shelf technical specifications

(continued)

Description

Technical specification

5U84 Primary Storage Shelf: Dual RealStor 5005 12Gb SAS
RAID controllers per storage shelf

5U84 Expansion Storage Shelf: Dual Storage Bridge Bay
(SBB) 2.1 compatible Expansion I/O modules per storage
shelf

Controllers

Three universal x4 12Gb mini-SAS connectors (SFF-8644)
per Expansion I/O module

Host/Expansion Interface

1300 watts maximum continuous output power at high line
voltage

You can connect up to four storage shelves to the 5350
Appliance compute nodes.

Maximum output power

200 - 240 VAC @ 6.67 A

AC power requirements

200V - 240 VAC

Operating voltage

Specification: IEC-60320-C20 to IEC-60320-C19, 20A/250V,
Black, 4ft

The IEC-60320-C20 plugs into a Power Distribution Unit
(PDU) on a rack. The IEC-60320-C19 plugs into an appliance
or a storage shelf power supply.

Note:

If your power distribution unit is not compatible with

the IEC-60320-C20 plug, Veritas recommends that you
purchase your power cable locally. Make sure the power
cable meets or exceed the indicated power rating.

AC power cable

50/60Hz

AC Frequency range

81% @ 10% load

89% @ 20% load

93% @ 50% load

90% @ 100% load

Power conversion efficiency

Operating: 5º to 35ºC (de-rate 5ºC above 2,133m (7,000’))
(41°F TO 95°F)

Non-operating: -40°C to 70°C (-40°F TO 158°f)

Temperature range

Technical specifications, Environmental/Protocol standards, and Compliance standards

Veritas 5U84 Storage Shelf technical specifications

Summary of Contents for 5350















































































Search results

Summary of Contents for 5350

Reviews:

Related manuals for 5350

Brands by name

Popular brands

VERITAS 5350, Product Description Manual

Search results

Summary of Contents for 5350

Reviews:

Related manuals for 5350

Brands by name

Popular brands