Components for installing the storage shelves
Components for installing the rack rails and the node
Verita
s
™
5250 D Series Appliance
Quick Start Guide
STEP 1: INSTALL STORAGE SHELVES
1.1
2.1
1.2
1.3
Node (x1)
Node rails (x2)
Bezel (x1)
Storage rails (x2)
Storage shelf
(x1)
Hook and loop straps
*optional
Position one of the rail’s rear flange in
the rear of the rack post and align it to
two Rack U spaces and press it into the
holes. There will be an audible “click” that
assures correct placement. Repeat this
process on the other side of the rack.
Repeat this process at the front rack
post on the same sides of the rack as the
above step. Ensure the alignment of the
Rack U spaces and press it in the same way
as above step ensuring an audible
click
.
If a change in location on the rack is
required, pull on the blue release latch
on each rail to unseat the rails.
Click
STEP 2: INSTALL DISK STORAGE SYSTEM
Align the disk storage system to the rails and slide it
in, rear side first, until the screws on the front of the
system are tight with the front flanges of the rails.
2.2
Tighten the thumbscrews on the system until they stop.
