Instructions
The plane may be used with a push or pull stroke, and held in a variety of
ways, as shown below.
Note:
Although the throat is relieved to minimize chip packing, periodic
inspection and manual clearing of the throat are nonetheless required.
To disassemble the plane, remove the blade clamping screw and slide the
blade outward, as shown in
Figure 3
. Then push the tip of the tongue
against the bed, swing the tip out, and pull the tongue out through the
body. Reverse these steps to reassemble the plane.
Figure 2: Gripping the plane.
Figure 3: Disassembling the plane.
1
2
3
4
5
3
