Verint nextiva s17xxe series, User Manual

Page: 12 / 63

1: Overview
2 Verint Video Solutions
About the Multiport S17XXe Series
The S17XXe series contains several devices covering different video input and functionality
needs.
Each device is configured to interface, right out of the box, with the most popular camera
data port configuration (4800 baud, 8 data bits, no parity, 1 stop bit).
Physical Characteristics
All S17XXe series devices are transmitters (- T ). Here is an overview of their features:
The video analytics capabilities of the S1704e-AS and S1708e-AS can be used inside a
Nextiva IntelliView solution. In the IntelliView Analytics Rule Builder, the S1704e-AS
supports a maximum of six views, and the S1708e-AS, of four views; both devices support
a maximum of five active rules. For more information, refer to the documentation set of the
Nextiva enterprise video management platform.
Unless otherwise specified, the word S17XXe refers to any of these devices.
All devices have two independent serial ports (for RS-232 and RS-422/485 protocols) and a
reset button.
You power the S17XXe transmitters with 12V DC.
Security
Every edge device comes with a unique SSL (Secure Sockets Layer) certificate for securing
its IP link. SSL is a commonly used protocol for managing the security of IP message
transmission. Therefore, the connections with another device, the SConfigurator tool, or a
video management software can be secured.
If enabled, the SSL protocol secures the following data: I/O, serial port, and VSIP (a
proprietary protocol) communication. It does not apply to audio and video transmission.
Once a device is in secure mode, you cannot access it anymore with Telnet and you cannot
perform firmware updates through the IP network on it. However, you can configure it with
SConfigurator.
Device Video inputs Onboard
analytics Data I/O Audio I/O
S1704e-AS 4
3
12 input dry contacts and
2 relay outputs 1 input/1 output
S1708e 8 12 input dry contacts and
2 relay outputs 1 input/1 output
or
12 inputs
S1708e-AS 8
3
12 input dry contacts and
2 relay outputs 1 input/1 output
or
12 inputs
S1712e 12 12 input dry contacts and
2 relay outputs 1 input/1 output
or
12 inputs
S1724e 24 12 input dry contacts and
2 relay outputs 1 input/1 output