28
2.
Press the Selector Control Dial to open the folder and display the MP3 files.
3.
Turn the Selector Control Dial to highlight an MP3 file.
4.
Press the Selector Control Dial to choose the file.
The display returns to the Time/Date display. The MP3 file begins to play and the
file’s title is shown at the bottom of the display.
To pause while listening to USB audio, press the Selector Control Dial. PAUSED
will be shown on the display. To resume play, press the Selector Control Dial again.
Note:
If the USB is removed during play, the display will indicate “MEMORY
DEVIcE NOT FOUND” and then go to the time display.
Listening to USB MP3 Songs — continued
Listening to SD MP3 Songs
The SD/MMC Card Reader is used to listen to MP3 files on Flash Memory Secure
Digital (SD) Cards, also known as Multi-Media Cards (MMC). An SD card with pre-
recorded selections is included with your Rise & Shine
®
.
SD Card memory capacity varies. Your Rise & Shine can play audio on all standard
SD Cards, up to 2 gigabyte (GB) capacity. There are also limits of not more than
800 MP3 files and not more than 100 directories (or “folders”) per SD Card.
Note:
Only MP3 files can be played and only directories containing MP3 files will
be displayed.
Inserting an SD Card
Insert an SD Card into the SD/MMC Card Reader
slot on the front panel. Insert the card with the label
up and the exposed pins facing down. As you push
in the card, you’ll notice a slight springy resistance.
Push a bit more until you feel the card stop. When
you release your finger, the card will engage and
spring back very slightly to be almost flush with the
front panel.
Removing an SD Card
To remove an SD Card, push it in with your finger and release. The card will spring
out slightly and you can easily remove it.
VA04-Man-Rev32.indd 28
7/19/11 10:43 AM
