15
Problem
Solution
Lamp does not light during wake
and sleep modes.
For proper alarm lamp operation:
1)
complete setting and activating the alarm at least 30 minutes before you want it
to sound.
2)
make sure the power cord is plugged in. The lamp will not function when the
unit is on battery power.
No light.
In the standard time mode, tap the top of the unit. In the programming mode,
recheck programming instructions.
NOTE:
When the unit is running on back-up batteries, the light will not work.
No radio or no sound.
Check the volume by pressing the
Volume button twice. This activates the audio
to the sound you’ve programmed. Use the
or
buttons to adjust the volume.
Alarm doesn’t function.
Verify the correct AM/PM setting.
Verify that the alarm is activated. An alarm is activated if an alarm or icon is showing
in the LCD display and the clock is displaying the time of day. If not, press the
WAKE button to activate the alarm or initiate alarm programming. (See page 11.)
Troubleshooting — continued
Rise & Shine
®
Serenity™ Natural Alarm
Clock & Sleep System
Dimensions 7.6"H x 2.5"D x 7.3"W
LCD Display
—
Dimensions: 1.5"H x
2.5"W Oval
Environment
— Operating Temperatures:
15°C to 35°C; 56°F to 95°F; Storage
Temperatures: 0°C to 40°C; 32°F to 104°F
Relative Humidity: 5% to 95% non-
condensing
LEDs
— Quantity: 21
Power
Input Power: 5V DC, 1.2 AMP from a
120/240 VAC, 50/60Hz AC/DC Convertor
4.5V DC from 3 Type AAA Alkaline
Batteries.
Power — continued
Recommended AC/DC Converter Line
Cord is SWITCHING POWER SUPPLY
MODEL S006MU0500120.
ETL Listed
Cord/Plug — Plug Type: Non-polarized/
USA two prong 60" cord length
Intellectual Property
— Patent: 6,236,622;
Trademark: Rise & Shine
®
, Serenity™
Safety
— ETL Listed
Warranty
— One–Year Limited
Technical Specifications
Cleaning
Disconnect the Rise & Shine from the power outlet. Use only a dry, soft cloth and a
mild non-abrasive cleaner to clean the lamp.
CAUTION:
Do not use solvents or cleaners containing abrasives, or ammonia-
based cleaners on this product.
CAUTION:
After cleaning, properly wipe and dry the lamp prior to restoring power.
Care and Maintenance
