C o n f i g u r a t i o n
3-7
Subnet Mask
Sets the address mask that delineates local subnet range. In most cases, the
factory-default range of 255.255.255.0 will suffice.
DHCP Serving
Enables DHCP. If enabled, the user must enter an IP address range to be
served.
Values: OFF, ON
Serve Range From
Sets the first address of the connected equipment served.
To
Sets the last address of the connected equipment served. When combined with
“Serve Range From,” determines the number of addresses served.
VPN
The VPN settings are described below.
Mode
Enables VPN to initiate or respond automatically upon usage (Normal) or
force responder mode (Listen) or initiate a tunnel (Initiate).
Values: Disabled, Normal, Listen, Initiate
Interface
Selects which interface supports VPN tunneling. Set to Wireless, unless in
Test Mode.
Values: Wireless, Local-Mgt, Router
Gateway
Sets Gateway address. Leave blank when using the wireless interface since, in
this case, the Gateway is provided through the PPP link.
Remote VPN Address
Sets the address of the remote VPN unit. This address must match the remote
VPN termination device.
Gateway
Sets the IP address of the routable Gateway to the remote terminating VPN
device.
Remote LAN Subnet
Sets the remote subnet address on the unencrypted remote side of the tunnel.
Net-Mask
Sets the remote LAN net-mask to narrow the range of remote network clients
contacted.
Local LAN Subnet
Sets the local subnet address on the unencrypted local LAN side of the tunnel.
This address must match the router interface address described above.
Local LAN Net-Mask
Sets the local LAN net-mask to narrow the range of local network clients
connected to the tunnel.
PFS Mode
Enables or disables the Perfect Forward Secrecy (PFS) mode.
Values: OFF, ON
Key Life
Sets the PFS Key Life update period in seconds. The default is 28800
seconds.