VeriFone VX 805, Manual, Page: 3 / 40

Revision History
Document Version Date Author Description of Changes
1.0 January 19, 2018 MP 1st Release
2.2 April 6, 2018 MP Updated links to Datacap
Software
Installation notes:

The merchant is responsible for contacting their Reseller and obtaining a Merchant Number, as well as
having a Deployment ID created on DataCap’s PSCS Server prior to installation.

You must be running CRE/RPE version 12.8031 or higher to use this device. To install the required
version of CRE/RPE Windows 7 or above is required.

The click here for the pinpad’s supported application load for version supported by DataCap & Elavon.

The NETePay software only needs to be installed on 1 station which will act as the DataCap server.

It is recommended to install the NETePay Software on a back office computer that can act as a server.

The VX 805 driver, dsiPDCX software, and dsiEMVUS software needs to be installed on each station
that will process card payments.

A settlement command (manual settlement or auto settlement set in CRE/RPE) CANNOT be sent to the
processor from CRE/RPE. The settlement must be set to auto settle through the processor.

Device encryption is configured by the processor prior to deployment.