VeriFone V200t, Installation Manual

Page: 19 / 38

S
ETUP
Establishing Communication
V200
T
I
NSTALLATION
G
UIDE
19
Establishing
Communication
You can connect the V200t to your network by using the following options:
•
Connecting by Telephone Line
•
Connecting by Ethernet Cable .
Connecting by
Telephone Line
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
Figure 9 ). This is a direct connection and
the line is dedicated to the terminal.
Figure 9 Direct Telephone Connection
Connecting by
Ethernet Cable
Connect the ethernet cable to the ETH port on the terminal, then route it directly to
a network jack (see
Figure 10 ). This is a direct connection to your network.
Figure 10 Ethernet Connection
WARNING
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.