VeriFone V200t, Installation Manual

Page: 15 / 38

S
ETUP
Unpacking Shipping Carton
V200
T
I
NSTALLATION
G
UIDE
15
The following table describes the two preferred mounting methods and the
recommended measures to protect from PIN capture in four observation corridors:
Additionally, you may wish to implement the following to further increase security
during PIN entry.
•
Offer PIN security literature at the point of sale
•
Use signage to limit the view of the V200t to just that of the cardholder.
Unpacking
Shipping Carton
Carefully inspect the shipping carton and its contents for possible tampering or
damage.
1
Remove the V200t unit from the shipping carton. The standard package
contains the PIN pad, power pack, telephone cable, and printer paper roll.
Refer to
Accessories and Documentation for more information on related
accessories.
Figure 4 V200t Box Contents
2
Remove any protective plastic wrap and place the unit on a table or
countertop.
Table 3 Mounting Methods and Protection Measures
Observation Corridors
Method Cashier Customer in Queue Customers Elsewhere On-site Cameras
Countertop with
Swivel Stand No Action
Needed. Customer positions
PED No action needed Do not install within
view of cameras
Countertop with-
out stand Position the
PED to face
away from the
cashier. Use
signage to block
cashier’s view. Position the PED
between customer and
the next in queue.
Install the optional pri-
vacy shield. Privacy Shield Installed Do not install within
view of cameras
NOTE
A swivel stand gives the cardholder freedom to position the V200t to optimize
their viewing angle. If you are installing a swivel stand, you must include prompts
in your application directing the cardholder to position the V200t strategically to
restrict the view of other customers.