S
ETUP
Installing the K250 Kiosk
16
K250 I
NSTALLATION
G
UIDE
Figure 2- K250 Unit
Installing the
K250 Kiosk
Installing Tools and Materials
•
Adjustable Wrench
•
Small Open-End Wrenches
•
Set of Allen Wrenches, Ball End
•
Set Hex Wrenches
•
Small Socket Set
•
#1 Phillips Screwdrivers
•
Cable Ties
Optional Tools
•
Needle Nose Pliers
•
Drill + Associated Attachments
•
3/8“ Anchor Bolts (Minimum QTY 4)
•
Anchor Bolt Installation Tools
•
Lag Bolts
Stability
Verifone recommends that the unit must be securely bolted to the table / floor as in
accordance with the kiosk mounting instructions contained within this manual.
Pedestal must be purchased separately.
Field Wiring 1
All lines are routed inside the building within a grounded conduit
(recommended ½" diameter terminated by a ¾" Romex connector).
2
Only the power cord supplied with the kiosk should be used to power the
kiosk. Consult Verifone support before using other cords or extensions.
K250 Extended
K250 Slim
-
18
5/16
h
