VeriFone Indoor VeriPASS, Installation Manual

Page: 13 / 18

Installation
◆
5
3
Installation
Unpack equipment in accordance with instructions listed in Chapter
2.
Warning:
To reduce the risk of fire, do not place this unit near
any heat producing source.
When selecting a location for your VeriFone Indoor VeriPASS
Terminal equipment, avoid areas having:
■
Direct sunlight or objects that produce heat.
■
Moist areas.
■
Excessive dust.
■
Electrical “noise” or devices that cause excessive voltage
variations such as air conditioners, fans, or high frequency
security systems.
Installation Procedures
Note:
If not present, install the Ferrite Bead on the
Multicable, as close to the Base Unit as possible. This
filters out any interference generated by the
equipment. Refer to the diagram on page 1 for
location.
Use the following procedure to install and power up the VeriFone
Indoor VeriPASS Terminal in a VFI Ruby environment.