Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31(0)71 541 61 89
13
www.verhagenleiden.nl
6.5
Charging the battery
The charging station must be well-ventilated because gases and fumes are immited during
charging.
Avoid open flames or sparks at the charging station during charging.
If the batteries are discharged below 30% of their capacity, the V-Move will only run 50% of its
normal speed. The V-Move must then be charged. When the batteries are discharged below 20% of
their capacity, the V-Move stops.
The battery indicator shows the status of the batteries by means of an LED. When the batteries are
being charged, the LED of the indicator flashes. When the LED is towards the right of the indicator the
batteries are fully charged.
The connection plug for the battery charger is located on the right in a recess in the housing. The V-
Move has an internal charger.
The internal battery charger works fully automatically.
Procedure:
1. Insert the plug into the socket on the housing and insert the plug into the socket.
2. The automatic battery charger will charge all elements at maximum voltage.
3 The battery charger switches off automatically.
6.6
Cleaning
Do not use a high-pressure cleaner or hard water jet for cleaning, as the electrical and
electronic system is not watertight and can be damaged.
When used indoors and outdoors, the bottom will become contaminated with parts from the
environment. It is necessary to remove this contamination regularly because the contamination it
operation of the drive.
