Appendix F
1.6v-05.2019
11 | Page
1.4 Applied Voltage Signals
(continued)
The following signals all require the application of either 24 VDC or 115 VAC (model dependant).
Function
Connector
Number
Description
Graphic
Stop
P8
- will turn ON the relay and
drive the pump stop signal
which will allow the pump
to start.
- the signal will respond dif-
ferently depending on the
settings in
Appendix E (1.3
Control Input Wiring)
.
- when the signal is
switched ON, the LED D8
will light up.
NOTE: This function is
applicable for both 24
VDC and 115 VAC.
Table 5 Applied Voltage Signals
