Nov21
Product Instructions
CYLON LED Streetlights,
VER-UST2-9
0
USER GUIDE:
The purpose of this user guide is to explain the necessary steps for the proper use of a LED Streetlight and
to assure peak performance of this product. It is intended for use as reference by a fully qualified electrician
or technician. This document should never be considered a substitute for any provision of a regulation or
state and/or local code. Please read this entire manual to fully understand and safely use this product.
Specifications are subjected to change without notice. Please visit
most recent technical data.
WARNINGS & DISCLAIMERS
1)
The light source of this luminaire shall be only replaced by the manufacturer or his service agent
or a similar qualified person
2)
The control gear of this luminaire shall be only replaced by the manufacturer or his service agent
or a similar qualified person
3)
Ensure the fixture is fully installed by a suitably-qualified person before switching power on to the
fixture
4)
Do no install the fixture in a sealed / enclosed environment
5)
Do not cover / mask the fixture
6)
Ensure the power is turned off before performing maintenance on the fixture
7)
Any part of this fixture considered damaged and/or in need of replacement; it shall be exclusively
replaced by the manufacturer or his service agent or similarly qualified person in order to avoid a
safety hazard. Please refer to VERDE LED standard Warranty document for full Terms & Conditions
8)
The terminal block is not included with the fixture. Installation may require advice from a suitably
qualified person
9)
Always replace any cracked/damaged protective shield
10)
This fixture is suitable for indoor and outdoor use
11)
These LED street lights meet the Photobiological Safety Standard IEC 62471:2006
12)
Specifications and Instructions may change without notice
13)
All VERDE products comply with surge immunity as specified by EN 61547:2009. However, the
Verde Warranty also requires additional surge protective devices to be installed on-site against the
effects caused by remote lightning strikes, inductive or capacitive coupling, and switching surge
voltages. These are typically also installed at the main distribution and sub-distribution panels and
are to be maintained and operational always. Refer to industry experts such as
www.phoenixcontact.com for further surge protection advice.
14)
This product contains a light source of energy efficiency class ‘’D’’
