Nov21
User Responsibilities:
The responsibility to comply with all national and local laws, ordinances, and regulations regarding the
installation, maintenance and operation of the device lies with the buyer and handler of the device. These
parties may include, but are not limited to the contractor, installer, purchaser, owner, and user of the
product. Consult Lighting Application Engineering services as needed.
INSTALLATION INSTRUCTIONS
:
A - New fitting:
1.
Ensure the mains are disconnected before handling the luminaire.
2.
Plan carefully the position of the floodlight using the dimensions provided in Product description
table.
3.
Fix the bracket with the appropriate roll plugs, screws and accessories (not provided with the
floodlight) needed depending on the type of surface.
4.
Wire the luminaire as the following diagram (standard cable configuration: 0.5m VDE/UL listed
isolated cable, diameter of 3*1.0mm with cold pressed terminal.
5.
Adjust the bracket to aim the floodlight to the desired point.
6.
If your installation requires IP65, make sure you use an IP65 connector to connect the wires to the
mains (not included with the floodlight).
7.
Turn on power supply.
