13
2. Select Wizard.
3. Select your language preference from the pull-down menu. The selection “set from browser
options” will automatically set the administrator language to the current browser language
setting. If the browser language is not supported in the administrator, the default language
of English will be enabled. Press Next to continue.
4. The next screen allows you to defi ne a new password for the user “admin”. If you want to keep
the current password, simply press Next to advance to the next screen. The password must
be a minimum of 5 characters and a maximum of 8 characters.
5. The next screen allows you to defi ne a new Hostname for the NAS drive. If you want to keep
the current Hostname, simply press Next to advance to the next screen.
6. The next screen allows you to select between automatic and static addresses for the NAS
drive’s IP Address and Domain Name System (DNS) address. It is recommended that your
network equipment be enabled to provide DHCP service, and that both settings on this
screen remain at the factory settings.
Alternatively,
if your network requires that you defi ne static addresses, then you may enter
them in the form provided.
Press Next to continue.
7. The next screen allows you to manually set the date and time, or to use an available Network
Time Protocol (NTP) server. It is useful to set the correct date and time because time stamps
are used in the various status logs that are described later in this manual. After fi lling in your
selections, press Next.
