4
ON/OFF Button. Once the AC Adapter has been properly connected to
1.
the drive and an AC outlet, you can press the ON/OFF button to power
on the drive. To turn off the drive, press the ON/OFF button again.
DC Input Connector. Connect the DC cable of your included AC
2.
Adapter to the DC Input Connector.
USB Connector. Use this connector to attach the drive to your computer
3.
via USB.
eSATA connector. Use this connector to attach the drive to your
4.
computer via eSATA.
About the Hard Drive
The hard drive comes pre-formatted in FAT32 format. This format allows for
operation with either Windows or Mac OS.
Note: Capacity dependent on model. 1 MB = 1,000,000 bytes/1 GB =
1,000,000,000 bytes/1 TB = 1,000,000,000,000 bytes. Some capacity
used for pre-loaded software, formatting and other functions, and thus is
not available for data storage. As a result, and due to differing calculation
methods, your operating systems may report as fewer megabytes / gigabytes
/ terabytes.
Locating the Drive on your desk
Place the drive on a sturdy desk or table that is free from clutter that could
block airfl ow around the unit. The drive is designed to lie fl at on its rubber
feet, or may stand upright. In either orientation take care not to block any
air vents.
