Verathon AORTASCAN AMI 9700 Operation & Maintenance Manual Download

Page: 26 / 88

DISPLAY SCREENS

HOME SCREEN

The Home screen appears when the AortaScan is first powered on. It serves as a starting point for all of the
main functions of the device.

The Home screen displays:

• In the header: Your clinic’s name, the battery status indicator and the current date and time.
• On the left side: A list of saved exam results (10 maximum) saved in chronological order. Yellow

folders hold saved exams. Grey folders represent empty spaces still available for saving exam results.

Table 6.

Battery Power Level

BATTERY ICON

POWER LEVEL

Indicates a fully charged battery.

Indicates a battery 50% to 75% charged.

Indicates a battery 25% to 50% charged.

Indicates a battery is almost depleted. Can power a few more scans.

Indicates that a battery should be replaced immediately.

Summary of Contents for AORTASCAN AMI 9700

























































































Search results

Summary of Contents for AORTASCAN AMI 9700

Reviews:

Related manuals for AORTASCAN AMI 9700

Brands by name

Popular brands

Verathon AORTASCAN AMI 9700, Operation & Maintenance Manual

Search results

Summary of Contents for AORTASCAN AMI 9700

Reviews:

Related manuals for AORTASCAN AMI 9700

Brands by name

Popular brands